+8618237173989

Quins són els errors comuns del dispensador de combustible?

Jan 30, 2022

The error of the fuel dispenser exceeds ±0.30 percent , and the reasons for not being able to adjust are as follows:


1. El bloc de connexió del mesurador de cabal està desgastat. Quan augmenta el diàmetre del forat del bloc de connexió, augmenta la carrera del pistó, augmenta el volum de descàrrega i també augmentarà la quantitat d'oli pagat.

Solution for the fuel dispenser equipment: replace the connecting block or adjust it with the adjusting mechanism. If the hole is not worn much, the original adjustment screw can be lengthened appropriately to increase the adjustment by 0.30 percent .


2. El revestiment del cilindre del pistó de l'equip dispensador d'oli està desgastat. La bretxa entre la màniga de coure gran i el pistó gran està desgastada i l'oli de l'àrea d'alta pressió-no passa pel mesurador de cabal per a la mesura de la descàrrega d'oli i es filtra per la bretxa, donant lloc a un error de mesura. .

Tanker Equipment Solution: Return to factory for repair or replacement. If the error value exceeds the allowable error of ±0.3 percent , the wearing parts should be replaced.


3. L'-anell tòric intern està danyat. Després de treballar durant molt de temps, l'anell O-es fàcil de portar i fallar, provocant fuites internes i fent que l'error d'indicació no sigui tolerant.

Solució per a equips de cisterna: substituïu l'-anell tòric.


4. The adjustment rod of the fuel dispenser equipment is stuck or worn. That is, there is a foreign body that jams the flow sensor or the adjustment rod is seriously worn, which makes the leakage in the flow measurement converter too large, and even the adjustment value and the leakage amount are very different. For example, broken springs, vanes, screws, gaskets, and other foreign objects on the high-pressure spool in the separator. It is squeezed between the piston and the copper sleeve, or on the top of the piston, so that the piston cannot move and the sensor cannot drain oil.

Solució per a l'equip cisterna: treure el pistó, treure el cos estrany i reparar la peça enganxada; substituïu la barra d'ajustament molt gastada.


Enviar la consulta